{{currentPhoto.altText}} billede {{currentPhoto.number}}

Se alle billeder på én side

Bil HPI RS4 NITRO 3 DRIFT 2010

806 visninger | Oprettet: 2. sep 2010

Bedømmelse

Du kan først stemme, når din egen rc-enhed er oprettet og stemt ind. Opret din egen rc-enhed

Stemmefordeling (6)

Nickolaj L

| 0 år | Oprettet: 31. aug 2010

RC-enheder (1)

Forumemner (1)

Følger (2) Følgere (1)

Bil HPI RS4 NITRO 3 DRIFT

Udfordringer

Udfordr

Årgang:

2010

Drivkraft:

Nitro Star T3.0 motor
Four-wheel drive (4WD)
25% nitro (Buryns)

Spec. motor:
Glow Plug: R5 (use HPI #1504)
Displacement: 3.01cc
Bore: 16.8mm
Stroke: 13.6mm
Maximum Horse Power: 2.2PS(2.17hp)/ 31,000rpm
Maximum RPM: 32,000rpm Head Gasket: x3 0.2mm

Topfart

70-80 km/t

Størrelse

Length: 365mm
Width: 190mm
Wheelbase: 256 to 259mm

Vægt

Weight: Bare chassis 1870g, with body 2000g (weights are approximate, and w/o fuel)

Ekstraudstyr

10 spoked wheels - kstra sæt dæk til alm vej
Fail safe (ej monteret endnu)

Bemærkninger

Min første Nitro bil

Spec.:
Chassis: Dual-deck design with 2.5mm aluminium lower chassis and composite plastic upper deck with removable radio tray
Suspension: Four-wheel independent, double wishbone
Turnbuckles: Fully equipped, steel
Drive Train: 4WD, front & rear sealed gear diffs
Tyre Type: treaded hard drift compound, HPI Type A
Gear Pitch: 1M (1 Module)
Wheel Hubs: 12mm hex w/ capture pins
Shock Type: Composite plastic, oil-filled, with coil-over spring
Shock Towers: Composite plastic with strengthening ribs
Bodyshell: Painted and decaled HPI officially licensed polycarbonate bodyshell included (varies with kit choice)
Ball Bearings: 18 throughout drivetrain