{{currentPhoto.text}}
<
Buggy Zircon (SOLGT)
2.360 visninger
|
Oprettet:
Buggy Zircon (SOLGT)
Årgang:
Drivkraft:
European styled body and wing.
Fully ballraced.
3 shoe clutch and lightened flywheel.
"C" hub suspension system.
Large volume hydraulic coil-over shocks.
Adjustable camber and castor adjustments.
Rear toe-in and toe-out adjuster.
Sealed receiver and battery box.
Dual centrally mounted brake discs.
Alloy tuned pipe and muffler protector.
Mini racing bumper.
Top-deck chassis brace for less flex.
High grip mini pin racing tyres including tyre inner foams.
Fully ballraced.
3 shoe clutch and lightened flywheel.
"C" hub suspension system.
Large volume hydraulic coil-over shocks.
Adjustable camber and castor adjustments.
Rear toe-in and toe-out adjuster.
Sealed receiver and battery box.
Dual centrally mounted brake discs.
Alloy tuned pipe and muffler protector.
Mini racing bumper.
Top-deck chassis brace for less flex.
High grip mini pin racing tyres including tyre inner foams.
Topfart
Hmm... måske de 70+ km/t, da motoren er en smule større end min HPI Rs4 3 Evo...
Størrelse
Tekniske data :
Længde: 450mm
Brede: 304mm
Højde: 225mm
Hjul afstand: 325mm
Track (Foran): 260mm
Track (Bagved): 260mm
Dæk (Foran): 116 x 41mm
Dæk (bagved): 116 x 41mm
Vægt: 3400g
Gear Ratio: 10.9:1
Længde: 450mm
Brede: 304mm
Højde: 225mm
Hjul afstand: 325mm
Track (Foran): 260mm
Track (Bagved): 260mm
Dæk (Foran): 116 x 41mm
Dæk (bagved): 116 x 41mm
Vægt: 3400g
Gear Ratio: 10.9:1
Vægt
Hmm... Omkring de 3Kg...
Ekstraudstyr
Sender : Robbe Futaba Attack Digital Proportional T2DR
Servoer : Robbe Futaba S3003
Servoer : Robbe Futaba S3003
Bemærkninger
Har lige fået den, så skal lige have den justeret og sat i stand...
Har også en Buggy magen til, som jeg bruger til Reservedel, ellers tror jeg at jeg bygger reservedles bilen op, da den ikke mangler så meget...
Så er den tilsalg....
Lidt info om Bilen...
Recognised as one of the strongest models available in this class. Special features include: Front and rear disk brakes, very smooth front and rear shocks, solid front and rear end construction with added rear toe-in, toe-out adjusters, muffler and guard, fuel tubing, sealed receiver and battery box, fully ballraced, 3 shoe racing clutch with light weight flywheel, .21 engine with anodises heat sink and 5 spoke wheels. A European styled body and wing make the car respond well under power. Its unique suspension geometry make the Zircon a real race winner. Please note air-filter is not provided with this model.
A top deck chassis brace add rigidity to the buggy. The .21 engine with an anodised head is included in this 85% assembled model. This buggy is a competition model and include many features other manufacturers can only dream about for the price.
Suitable for most of the FP range of cars this very strong mini bumper can be used on the rear end as well. The unique one piece "C" hub and spindle system allow for better turn in on tight tracks and a super smooth suspension. Large coil-over shocks give a very soft ride.
A sealed receiver box is conveniently located at the side of the car. The radio tray houses the servo's, battery and receiver and protects against accidental damage. It is easily removed for cleaning and centre diff maintenance.
The tuned pipe is included with this model. A muffler protector and spill tray give adequate side impact protection to the pipe.
A very special feature of this car is the rear end adjustable toe-in toe-out adjuster and camber control. A mini bumper is available for the rear end. Heavy-duty large volume shocks give an unrivalled suspension. The European styled wing on the adjustable wing mount gives maximum down force.
A innovative one piece "C" Hub and steering spindle allow for better turn-in and smooth suspension system. The front shocks feature a dust seal at the bottom of the shock body to keep the shaft clean.
Trick looking wheels and trims make this buggy stand out. The mini pin racing tyres are standard with this buggy.
A European designed low profile high detail Polycarnonate body with a indestructible rear spoiler.
Link til siden : http://www.ozshops.com/cgi-bin/RT_Resp.cgi?application=rcmcfp
Skal lige siges at den Anden Flying point jeg har er En Flying Point Probe 2000S
TILSALG .............. 1500 ,-
Har også en Buggy magen til, som jeg bruger til Reservedel, ellers tror jeg at jeg bygger reservedles bilen op, da den ikke mangler så meget...
Så er den tilsalg....
Lidt info om Bilen...
Recognised as one of the strongest models available in this class. Special features include: Front and rear disk brakes, very smooth front and rear shocks, solid front and rear end construction with added rear toe-in, toe-out adjusters, muffler and guard, fuel tubing, sealed receiver and battery box, fully ballraced, 3 shoe racing clutch with light weight flywheel, .21 engine with anodises heat sink and 5 spoke wheels. A European styled body and wing make the car respond well under power. Its unique suspension geometry make the Zircon a real race winner. Please note air-filter is not provided with this model.
A top deck chassis brace add rigidity to the buggy. The .21 engine with an anodised head is included in this 85% assembled model. This buggy is a competition model and include many features other manufacturers can only dream about for the price.
Suitable for most of the FP range of cars this very strong mini bumper can be used on the rear end as well. The unique one piece "C" hub and spindle system allow for better turn in on tight tracks and a super smooth suspension. Large coil-over shocks give a very soft ride.
A sealed receiver box is conveniently located at the side of the car. The radio tray houses the servo's, battery and receiver and protects against accidental damage. It is easily removed for cleaning and centre diff maintenance.
The tuned pipe is included with this model. A muffler protector and spill tray give adequate side impact protection to the pipe.
A very special feature of this car is the rear end adjustable toe-in toe-out adjuster and camber control. A mini bumper is available for the rear end. Heavy-duty large volume shocks give an unrivalled suspension. The European styled wing on the adjustable wing mount gives maximum down force.
A innovative one piece "C" Hub and steering spindle allow for better turn-in and smooth suspension system. The front shocks feature a dust seal at the bottom of the shock body to keep the shaft clean.
Trick looking wheels and trims make this buggy stand out. The mini pin racing tyres are standard with this buggy.
A European designed low profile high detail Polycarnonate body with a indestructible rear spoiler.
Link til siden : http://www.ozshops.com/cgi-bin/RT_Resp.cgi?application=rcmcfp
Skal lige siges at den Anden Flying point jeg har er En Flying Point Probe 2000S
TILSALG .............. 1500 ,-
Buggy Zircon (SOLGT)
feb 2008
Følger: 16 Følgere: 16 RC-enheder: 27 Emner: 10 Svar: 58
(-:
feb 2005
Følger: 9 Følgere: 8 RC-enheder: 9 Emner: 1 Svar: 9
ham der kp har også givet mig lav bare fordi min er solgt.... skal vi ikke gøre noget ved det?
maj 2004
Følger: 12 Følgere: 9 RC-enheder: 7 Emner: 19 Svar: 28
Jesper C : Hvorfor står der så i fronten navnet på den?
aug 2004
Følger: 38 Følgere: 36 RC-enheder: 6 Emner: 173 Svar: 480
maj 2004
Følger: 12 Følgere: 9 RC-enheder: 7 Emner: 19 Svar: 28
Hvorfor afviser i den?